 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
See further down the page for parts by Alan Gibson and Bill Bedford
SSMRS Wagon Kits
These kits are available to members only from the Parts Officer of the SSMRS
| WE1 | GWR Small Cattle Wagon, Dia. W3 (set of etches only) |
|
| WE2 | NER Cattle Wagon, Dia. K1 (set of etches only) |
|
| WE3 | NER 10 Ton Perishable Goods Van (set of etches only) |
|
| WE4 | GNR 8 Ton Van (set of etches only) |
|
| WE5 | LBSCR 8 ton van (set of etches only) |
|
| WE6 | LNER 12 ton goods van (set of etches only) |
|
| WE7 | LNER 12 ton fruit van (set of etches only) |
|
| WE8 | BR 20 ton Brake van (set of etches only) | |
| WE9 | Cambrian/GWR/BR 15t Brake van (set of etches only) | |
| WE10 | Barry Railway twin-bolster (set of etches only) | |
| WC1 | 1907 7 plank RCH mineral wagon (whitemetal body parts) |
|
| WC2 | Cambrian 2 plank general merchandise & slate wagon (whitemetal body parts) per set |
|
| WC3 | North British Dia.77 3 plank open wagon (whitemetal body parts) per set |
|
| WC4 | MR Diag 299 open wagon (whitemetal body and solebar parts) per set |
|
| WC5 |
BR 16 ton Mineral wagon (whitemetal body parts (Alan Gibson).
The kit comes with one side of each type (top flap door or no top flap door) but as you're going to need several of these this shouldn't be a problem. |
|
Wagon Parts
These parts are available to members only from the Parts Officer of the SSMRS
| WA1 | Wagon axlebox, RCH oil, wooden solebar, (whitemetal) |
set of 4 |
| WA2 | Wagon axlebox, GER 'E' grease, wooden solebar (whitemetal) |
set of 4 |
| WA3 | Wagon axlebox, Gloucester grease, wooden solebar (whitemetal) |
set of 4 |
| WA4 | Wagon axlebox, Attocks grease, wooden solebar (whitemetal) |
set of 4 |
| WA5 | Wagon axlebox, Surrey-Warner (whitemetal) |
set of 4 |
| WA6 | Wagon axlebox, William Panter (whitemetal) |
set of 4 |
| WA7 | Wagon Axlebox, BR Plate(whitemetal) |
set of 4 |
| WA8 | Wagon axlebox, MR Ellis (whitemetal) |
set of 4 |
| WA9 | Wagon axlebox, BR SKF Roller bearing (whitemetal) |
set of 4 |
| WA10 | Wagon axlebox, BR Timken Roller Bearing (whitemetal) |
set of 4 |
| WB1 | Etched brake gear 1907 P.O. (Bill Bedford) - new design |
per set |
| WB2 | Etched brake gear 1923 P.O. (Bill Bedford) - new design |
per set |
| WB3 | Etched brake gear GWR D/C (Bill Bedford) |
per set |
| WB4 | Etched MR short brake levers (8) (Bill Bedford) |
per set |
| WB5 | Etched MR long brake levers (8) (Bill Bedford) |
per set |
| WB6 | Etched RCH pin-down wagon brake levers and guides (4) |
per set |
| WB7 | Brake gear for 9' wheelbase wagon (whitemetal) |
each |
| WB8 | Brake block & hanger, Midland Railway / RCH (whitemetal) |
set of 4 |
| WB9 | Brake gear for 10' wheelbase wagon (whitemetal) |
each |
| WB10 | Brake block & hanger, Midland Railway wagons pre-1907 (whitemetal) |
set of 4 |
| WD1 | 9' wheelbase solebar, with V hangers (cast whitemetal) |
each |
| WD2 | Van end stanchions (cast whitemetal) |
each |
| WD3 | Van sliding doors (cast whitemetal) |
each |
| WD4 | Veranda weights for BR Brake van (cast whitemetal) |
each |
| WD5 | Duckets for BR brake van (cast whitemetal) |
each |
| WD6 | Chimney for BR brake van (cast whitemetal) |
each |
| WG1 | Wagon spring, 4-leaf |
set of 4 |
| WG2 | Wagon spring, 9-leaf |
set of 4 |
| WG3 | Wagon spring, 4-leaf (suitable for steel solebar wagons) |
set of 4 |
| WS1 | Wagon buffer stock, ribbed - no rams (whitemetal) |
set of 4 |
| WS2 | Wagon buffer stock, plain, short, no rams (whitemetal) |
set of 4 |
| WS3 | Wagon buffer stock, plain, long, no rams (whitemetal) |
set of 4 |
| WS4 | Buffer stock, Midland Rly, 10T - 20T brakes, cattle & open wagons (whitemetal) |
set of 4 |
| WS5 | Wagon buffer stock, long thin flared base w/m rams |
set of 4 |
| WS6 | Wagon buffer stock, fat taper with w/m rams |
set of 4 |
| WS7 | Wagon buffer stock, thin taper with w/m rams |
set of 4 |
| WS8 | Wagon buffer stock, Dowty 24" with w/m rams |
set of 4 |
| WS9 | Wagon buffer stock, 2 rib (G.W.) with w/m rams |
set of 4 |
| WS10 | Wgon buffer stock with w/m rams Browns patent |
set of 4 |
| WU1 | Wagon underframe ironwork, etched, 3+ wagons (Ambis) |
per set |
| WV1 | Cast whitemetal drop down vacuum pipes |
per pair |
| WV2 | Cast whitemetal vacuum cylinder |
each |
| WV3 | Cast whitemetal vacuum changeover switch for 16T mineral wagons |
each |
| WW1 | Etched rocking BR W-iron with ironwork (MJT) |
per pair |
| WW2 | Etched rocking GWR/RCH W-iron with ironwork (MJT) |
per pair |
| WW3 | Etched rocking BR heavy-duty W-iron with ironwork (MJT) |
per pair |
| WW4 | Etched narrow W-irons, four separate (Bill Bedford) |
set of 4 |
| WW4 | GNR Etched rocking W-irons with ironwork |
set of 4 |
Wagon transfers
Waterslide transfers produced for the SSMRS by Fox.
| FRH 6100:S | GWR Waterslide wagon transfers: pre 1894 |
per pair |
| FRH 6101:S | GWR Waterslide wagon transfers: pre 1904 - 191 |
per pair |
| FRH 6102:S | GWR Waterslide wagon transfers: pre 1920 - 1936 |
per pair |
| FRH S610 | MR Waterslide wagon transfers |
per sheet |
A selection of Alan Gibson S scale kits and parts is also available either through the society or direct from Alan himself. For the prices of Alan Gibson's parts see his Web site.
.
| SM04 | 1923 RCH 7 plank kit - ironwork etchings plus castings and wheels | ||
| SM06 | Etched brass 9' underframe kit with cast body, etc. for LMS D 1666 open | ||
| SM697 | Set of 4 RCH axlebox and spring castings (steel solebar) | ||
| SM698 | Set of 4 MR Ellis axlebox and spring castings (wooden solebar) | ||
| SM33 | Wagon strapping sheet | ||
| SM40 | 17'6" x 9' steel underframe kit. Requires buffers, wheels and waisted bearings AB2 | ||
| SM41 | 17'6" x 10' steel underframe kit. Requires buffers, wheels and waisted bearings AB2 | ||
| LBSCR open wagon | |||
Bill Bedford has an extensive S scale Catalogue of kits (including some wagons) which can be produced to order directly from Bill (not via the SSMRS). Bill aims for a 6-8 week production cycle, but this can be extended if for instance he cannot fill particular sheets of if he gets sidetracked by other work. Delivery times are minimum of 4 weeks though 12 weeks is more typical. If delivery could be a problem it is best to check with him before ordering.
A Bill Bedford PO wagon kit in S Scale built by John Holden:Photo J Prior
 |
 |
 |
 |
 |
 |
 |
